Check your bike with POWDERS
A simple, repeatable walk-around check to help spot problems before you ride.
This is the same approach used by DocBike doctors and paramedics before they set off on the response bikes.
Get a POWDERS reminder card — £1.50Keep POWDERS in your pocket
A handy, credit-card-sized reminder of your pre-ride checks, ready whenever you need it. Keep one in your wallet or motorcycle jacket and make POWDERS part of every ride.
Just £1.50 per card
Buy your POWDERS cardBefore you start: use your motorcycle owner's manual for the exact oil-check method, fluid specifications, tyre pressures and drive-chain adjustment. These vary between motorcycles.
POWDERS is a quick pre-ride check, not a substitute for routine servicing. If something looks, feels or sounds wrong, get it checked before you ride.
P PowerEnough petrol or battery charge for the journey?
Fuel or charge
- Check you have enough petrol or battery range for the journey you are planning.
- If your bike has no fuel gauge, know how you normally judge your remaining range — for example by using the trip meter.
- Use the fuel or charging guidance specified for your motorcycle.
O OilEngine oil, brake fluid and leaks.
Look for leaks first
- Look beneath the motorcycle and around the engine for anything that should not be there.
- Check around brake hoses, joints and suspension for signs of fluid leakage.
Engine oil
- Check the level using the method in your owner's manual. Some motorcycles are checked upright, some on a stand, and some need the engine warm or cold.
- Use the dipstick or sight glass as specified for your bike.
- Keep the level within the marked range and avoid overfilling.
- Only use the correct motorcycle oil grade specified by the manufacturer.
Brake fluid
- If your bike has hydraulic brakes, check the brake-fluid reservoirs are at the correct level.
- Check the front brake lever and rear brake pedal feel normal, without excessive travel or unexpected sponginess.
- A falling fluid level can be a sign of worn brake pads or a problem that needs checking.
W WaterCoolant and cooling system.
Liquid-cooled bikes
- Check the coolant level using the reservoir and the method shown in your owner's manual.
- Look for leaks from hoses, joints and around the cooling system.
- Check the radiator is reasonably clean and that its fins are not badly damaged.
- Use the coolant type specified by the manufacturer.
Air- or oil-cooled bikes
- Keep cooling fins or the oil cooler clear of heavy dirt and debris.
- Look for damage or leaks.
D Damage & Drive TrainA deliberate walk-around, then check how the power reaches the rear wheel.
Damage
- Walk around the motorcycle and look for anything new, loose, bent, cracked, leaking or missing.
- Check lights and lenses, levers and pedals, visible fasteners, structural areas and anything that looks different from yesterday.
Chain and sprockets
- Check the chain for correct slack using the measurement specified on the motorcycle or in the owner's manual.
- Make sure the chain is lubricated and does not have badly kinked or tight links.
- Look at the sprocket teeth for excessive wear or damage.
- If the bike uses a belt or shaft drive, follow the manufacturer's inspection and service guidance.
E ElectricsLights, horn and dashboard.
Check the lot
- Headlight: dipped and main beam.
- Tail light.
- Brake light using both the front brake and rear brake controls.
- Indicators on both sides, front and rear.
- Rear number-plate light, where fitted.
- Horn: working clearly and consistently.
- Dashboard: make sure warning lights behave as your motorcycle's manual describes.
R RubberPressure, tread, condition, age and valves.
Tyre pressure
- Check pressures when the tyres are cold, using a reliable gauge.
- Use the pressure specified for your motorcycle and load in the owner's manual.
Tread and condition
- Check the whole tyre for cuts, tears, bulges, cracking, foreign objects or other damage.
- For motorcycles, UK law requires at least 1mm over the central 3/4, all the way round
- We recommend to change around 2mm to maintain good tyre performance (The response DocBikes change their tyres at 4mm)
- Do not wait for the legal minimum if the tyre's condition or performance is already poor.
Age and valves
- Find the four-digit manufacturing date code on the sidewall: the first two digits are the week and the last two are the year. For example, 2325 means week 23 of 2025.
- Tyres do not have a single universal motorcycle expiry date in UK law, but rubber ages. Follow the tyre manufacturer's guidance and seek specialist advice if you are unsure about an older tyre.
- Check the valve looks undamaged and the dust cap is fitted.
S Steering, Suspension & SelfThe bike should move properly — and you need to be ready too.
Steering
- Turn the handlebars smoothly from full lock to full lock.
- Check for tight spots, grinding, unexpected play or anything snagging as the bars move.
- Make sure cables and hoses move freely and are not being trapped.
Suspension
- Compress and release the suspension. It should move and return smoothly without sticking or unusual noises.
- Look for corrosion or scoring on the fork tubes.
- Check carefully for oil leaking from the fork seals, particularly where it could reach the brakes.
Self
- How are you today?
- Are you tired, wound up or distracted? Are you ill, taking medication, or affected by alcohol?
- Think about how your physical and mental state may affect concentration, judgement and the way you ride. If you are not at your best, change the plan rather than simply setting off.
If in doubt, get it checked.
POWDERS should become a habit: Power, Oil, Water, Damage & Drive Train, Electrics, Rubber, Steering / Suspension / Self.
A few minutes before the ride is far easier than discovering a problem once you are already on the road.
Take the reminder with you — buy a card for £1.50DocBike NextGen — practical motorcycle checks for riders.